Location -> Products -> Water Treatment -> Industrial online analyzer -> 7.Ph meter
Type：1205 series Industrial PH Meter
Illustrate：CX-IPH-1205 series of microcomputer-based industrial control instruments are precision meters for measurement of PH value of solution.
CX-IPH-1205 Industrial PH Meter
CX-IPH-1205 series of microcomputer-based industrial control instruments are precision meters for measurement of PH value of solution. With complete functions, stable performance, simple operation and other advantages, they are optimal instruments for industrial measurement and control of PH value.
The advantages of these instruments include: LCD display with back light and display of errors; automatic temperature compensation; two-point calibration; isolated 4-20mA current output; dual relay control; adjustable delay; alarming with upper and lower thresholds; power-down memory and over ten years of data storage without backup battery
Various PH electrodes can be used in CX-IPH-1205 series of instruments.
Features:
The main features include: US T1 chips; 96 x 96 world-class shell; world-famous brands for 90% parts
Isolated protection output by means of photocoupler; no interference between input and output signals
EEPROM memory; backup battery not required and no data loss after power-off
High-performance operational amplifier; symmetrical ORP positive and negative values; low temperature drift;
high stability and accuracy.
Technical indexes:
1. Measuring range: PH: -4.00~18.00 mV: -l999~ +1999mv
2. Resolution: 0.01 PH l mV
3. Accuracy: 0.05
4. Action control: two sets of On/Off relays
5. Relay delay: adjustable
6. Analog output: 4-20mA isolated protection output
7. Overall dimension: 96 x 96 x 135mm
8. Dimension of the hole: 92 x 92 mm
9. Protection grade: lP54
10. Weight: 1.0kg
Standard configuration:
One secondary meter, one set of measuring cell, one electrode, three packs of standard buffer solution (for PH
4.00, 6.86 and 9.18 respectively).
Ordering guide:
1. To inform whether the electrode provided is a dual or ternary complex.
2. To inform the length of the electrode cable (default as 5m).
3. To inform the installation mode of the electrode, i.e. flow-through, immerged, flanged or pipe-based
installation.
Last：Industrial PH/ORP Meter Next：1204 seies Industrial PH Meter
