Location -> Industrial online analyzer -> 7.Ph meter
Type：Industrial Composite PH/ORP Electrode
Illustrate： It adopts the world-class solid dielectric and a large area of PCE liquid for junction, difficult to block and easy to maintain.
CX-IC-1705、CX-IC-1706、CX-IC-1707
Industrial Composite PH/ORP Electrode
Features
◆ It adopts the world-class solid dielectric and a large area of PCE liquid for junction, difficult to block and
easy to maintain.
◆ Long-distance reference diffusion channel greatly extends the service life of electrodes in the harsh
environment.
◆ There is no need for additional dielectric and there is a little amount of maintenance.
◆ High accuracy, fast response and good repeatability
Electrode Structure Chart Electrode Wiring Plug
Industrial Composite PH/ORP Electrode
Features
◆ It adopts the world-class solid dielectric and a large area of PCE liquid for junction, difficult to block and
easy to maintain.
◆ Long-distance reference diffusion channel greatly extends the service life of electrodes in the harsh
environment.
◆ There is no need for additional dielectric and there is a little amount of maintenance.
◆ High accuracy, fast response and good repeatability
|
Model No.: CX-IC-1705 Measuring range: 0~14PH Applicable temperature: 0~80℃ Accuracy: ≤ 0.02PH Response time: ≤ l0sec Slope: ≥96％ Zero point potential: E0=7PH±0.3 Internal resistance: MΩ(25℃)≤ 50MΩ Drift: ≤ 0.03PH/24h no accumulation Installation: Rotary locking type and tail 3/4 thread (Rotate the electrode for 1/4 circle to insert it into or take it out of the process.) It is widely used for measurement of all kinds of pure water and high-purity water in such places as thermal power plants (with the flow cell). |
|
Model No.: CX-IC-1706 Measuring range: 0~14PH Temperature range: 0-85℃ Compressive strength: 0.6MPa Material: PPS/PC Installation Size: Upper and Lower 3/4NPT Pipe Thread Connection: Low-noise cable goes out directly. The antimony is relatively sturdy and corrosion-resistant, which meets the requirements for solid electrodes, corrosion resistance and the measurement of the water body containing hydrofluoric acid, such as the wastewater treatment in semiconductors and iron and steel industries. The antimony-sensitive film is used for the industries corrosive to the glass. But there are also limitations. If the measured ingredients are replaced by antimony or react with antimony to produce complex ions, they should not be used. Note: Keep the antimony electrode surface cleaning; if necessary, the fine Sandpaper can be used to polish the surface of antimony. |
|
Model No.: CX-IC-1707 Measuring range: 0-2000mV Temperature range: 0-85℃ Compressive strength: 0.6MPa Material: PPS/PC Installation Size: Upper and Lower 3/4NPT Pipe Thread Connection: Low-noise cable goes out directly. It is used for the oxidation reduction potential detection in medicine, chlor-alkali chemical, dyes, pulp & paper-making, intermediates, chemical fertilizer, starch, environmental protection and electroplating industries. |
Last：Industrial Ultra-pure Water PH .. Next：Industrial Composite Pure Water..
