Location -> Products -> Water Treatment -> On-line Instrument -> Industry pH/ORP Meter
Type：CX-IPH-1203 industrial pH transmitter
Illustrate：This meter is specially developed for measuring the PH values of water used in such industries as chemical industry, power stations, electronic industry and fermentation industries.
CX-IPH-1203 industrial pH transmitter
Brief Introduction
1.CX-IPH-1203 Industrial PH Meter is our company’s latest-developed two (four)-wire transmitter type intelligent integrated industrial PH meter
2.Adopts the latest design pattern and is characterized by its high performance and reliability as well as LCD display
3.CX-IPH-1203 PH Meter is a kind of industrial PH meter for continuous measuring and monitoring.
4.Its pre-amplifier is a high-quality high-impedance amplifier. Its PH electrodes are imported combination electrodes
5.This meter is characterized by high accuracy, fast response, small volume and easy installation and maintenance.
6.Adopts two-point calibration and a two-wire system with 4~20mA output or a four-wire system with 24V power supply and 4~20mA output
7.It possesses strong interference immunity and the capacity of long-distance transmission that can reach as far as 200 meters.
Main Features
1.Equipped with the latest single chip microcomputer
2.Character: low powerconsumption, less peripheral components and high performance, stability and reliability.
3.This instrument adopts LCD display. It can display the PH values, mV andtemperature values respectively.
4.The meter has power-failure parameter protection.
5.It has two-point or one-point automatic calibration function that is convenient and accurate.
6.Automatic temperature compensation.
7.It can display the “zero-potential” pH value and slope of the electrode system.
8.It adopts 4~20mA current output.
Main Parameters
| Ambient temperature | 0~55C |
| Relative humidity | ﹤85% |
| Power supply | 24 VDC±5% |
| Solution temperature tested | 5～55C |
| Measuring range | PH: 0~14PH,Temperature: 0~85C |
| Intrinsic errors | PH: ±0.05PH,Temperature: ±0.5C |
| Input impedance | >l012Ω |
| Temperature compensation range and influence error | 5～55C ±0.5%FS/10C |
| Current output | 4~20mA (RL≤500Ω) ±0.5%FS |
Last：CX-IPH-1204 industrial pH meter Next：CX-IPH-1201 industrial pH meter
