成人免费看久久久a片,欧美另类videosbestsex牲,亚洲精品永久在线观看,国产suv精品一区二区62

sales01@cxflowmeter.com


When we choose a gear glue dosing pump chemical metering pump, liquid pump, gear metering pump, we should design the installation position of the gear pump in advance to
avoid the inlet pipe being too long, the inlet is smaller than the outlet, and the concentricity is not equal. Only when it is put into use can the gear metering pump play its role and measure accurately.

 

Otherwise, similar situations are not excluded when installing the gear metering pump, which will affect the work efficiency of the entire process. If the installation is not good,
unexpected situations will occur, causing unnecessary trouble, and even directly scrapping. So what should be paid attention to in the installation of gear metering pump?

 

1. The export is higher than the import to avoid siphon phenomenon.

2. The pump head and feed port should be installed vertically, preferably with self-weight pressure.

3. The inlet and outlet water pipes are installed with good sealing to avoid air leakage and air bubbles in the instrument.

4. The power supply voltage is stable and must have good grounding protection.

5. The installation environment is clean and spacious with good ventilation.

6. It is better not to use the raw material belt at the thread when the pipeline is installed, so as to prevent the raw material belt from entering and leaving the gear cavity and getting stuck in the pump.

 

When installing the gear metering pump, we must strictly follow the operation steps to prolong its service life. We also need to maintain and maintain it when we use it to prolong and improve its working efficiency.

 

 

If you want to know the parameters and quotation of the use range of resin polyurethane glue plastic pump, please contact winny:sales01@cxflowmeter.com