成人免费看久久久a片,欧美另类videosbestsex牲,亚洲精品永久在线观看,国产suv精品一区二区62

sales01@cxflowmeter.com

A real example of hot melt adhesive dispensing micro gear flow meters:

 

Their dispensing equipment is used for dispensing on new energy vehicle batteries. With our flow meter, if some modules are not dispensing, they can provide an alarm.

This can effectively reduce the quality problems of battery modules due to undispensed glue

 

Tesla-type battery packs for electric vehicles use more than 7,000 lithium batteries per car. Each battery must be firmly fixed with glue. Each battery has a hole.
Check whether the glue is dispensed at each hole. Appropriate, there are leaks to call the police, there is no way to use people to test.

G0.015 flowmeter, one hole per point, 4-5 pulses, if there is no pulse or less pulse, it will alarm.

 

Join CIXI flowmeter mainly for quality monitoring

 

Customer feedback after use: customer feedback is very good

 

The engineer feedback, the use is very good, the G series flowmeter can be well controlled, it needs to be equipped with a digital display, two pulse outputs

If you also want to know about micro flow meter, hot melt adhesive flow meter, adhesive flow meter, please do not hesitate to contact CIXIFM Winny: sales01@cxflowmeter.com