成人免费看久久久a片,欧美另类videosbestsex牲,亚洲精品永久在线观看,国产suv精品一区二区62

How to clean the insertion electromagnetic flow meter correctly? Email: sales01@cxflowmeter.com

 

 

 

The plug-in electromagnetic flow transmitter has the advantages of high cost performance, convenient installation and maintenance, etc.How toclean it in daily use?

 

 

 

For inorganic pollution, the electrode can be immersed in 0.1mol/L dilute hydrochloric acid for 30 minutes, washed with pure water, and then immersed in 3.5MOL/L potassium chloride solution for 6 hours before use.

 

 

 

Soak in 4% hydrogen fluoride solution for 3 to 5 seconds, take it out and rinse it with distilled water, then soak it in 0.1mol/L hydrochloric acid solution for several hours, and rinse it with distilled water.

 

 

 

For organic oil and oil film pollution, the surface of platinum or gold can be cleaned with detergent and then cleaned with pure water, and then Soaked in 3.5MOL/L potassium chloride solution for 6 hours before use.

 

 

 

Platinum surface is seriously polluted to form an oxide film. You can use toothpaste to polish the platinum or gold surface, then wash it with pure water, and then immerse it in 3.5MOL/L potassium chloride solution for 6 hours before use.

 

 

 

It is usually necessary to conduct periodic visual inspections of the plug-in electromagnetic flowmeter, check the surrounding environment of the electromagnetic flowmeter, remove dirt, ensure that no water and other substances enter, check whether the wiring is in good condition,and check whether there are new strong electromagnetic field equipment or new wires near the instrument. across the meter.

 

 

 

 

For more parameters and quotations of plug-in electromagnetic flow meter, please contact winny: sales01@cxflowmeter.com

 

Whatsapp: 008618049841995