Location -> Products -> Level -> Ultrasonic Level Meter
Type：CX-ULM-DA ultrasonic level difference meter
Illustrate：In order to satisfy hydroelectricity and water conservancy project requirement.
CX-ULM-DA Ultrasonic level difference meter
Brief introduction:
In order to satisfy hydroelectricity and water conservancy project requirement,
We research the new generation Ultrasonic level meter. It adopts advanced embedded
microprocessor technology to make meter high digital and intelligentize. It integrates with
ultrasonic transducer, servo circuit, temperature compensation circuit and compute main processor.
Application:
Mortar sedimentation
Coal washing process
Wastewater treatment
Sludge thickener,
Secondary clarifier
Features:
High precise
Non-invasive
Automatic temperature compensation
Substantially improved long-term stability
Specification:
Full scale: 5m, 10m, 30m
Unusable area: <0.3-1m
Frequency: 20 KHz~43.0 KHz
Power: AC 220V
Display: LED
Output signal: RS485（support Modbus protocol）or 4 relays of 250V/5A
Min display resolution: 1mm
Max measure error: 0.1%×full scale
Ambient pressure: normal or 0.1MPa (customizing)
Humidity:≤85% Non-Condensing for work
≤75% Non-Condensing for storage
Instrument dimension: 160×80×160mm
sensor dimension and fix:M48×1.5, M65×1.5, M30×2
Material: ABS Plastic for instrument;
ABS for shell; PP for sensor
Work temperature: ﹣20℃ ~60℃ for instrument; 0℃ ~50℃ for sensor
Storage temperature: ﹣40℃ ~85℃ for instrument;-40℃ ~85℃ for sensor
Fix model: G 0.5 inches external pipe thread
Protection degree: IP65
Last： CX-ULM-DM open channel ultraso.. Next：CX-ULM-CII ultrasonic sensor
