Location -> Products -> Level -> Level Switch
Type：CX-FLM-UQK-61 multi-point control type float level switch
Illustrate：Principle : CX-FLM-UQK-61 series combination type cable float level switch adopt magnetic switch cable combination (float round ,Oval and oblong ) .
Multi-point control type float level switch
Principle :
CX-FLM-UQK-61 series combination type cable float level switch adopt magnetic switch cable combination
(float round ,Oval and oblong ) .And the multi-point share a heavy hammer, and rely on a hung cable to fix the float
position. The high temperature type switch adopt stainless steel body material ,high temperature cable and mercury
switch contact ,the max. temperature can reach 180 Celsius degree .
Feature:
1．Non movable part outside, will not be stuck by the float .
2．The wetted part materials are plastic which is with good oil and acid corrosion proof.
3．Easy to field installation , especial suit for the use of underground pools.
4．No requirements on water quality ,especial suitable for sewage treatment.
5．Large action range ,easy to field adjust .
Main parameter :
| Type | Switch number | Range | Note |
| CX-FLM-UQK-61-1 | One point |
Through changing the float lead cable and clamping length tune it randomly ,the tuning range is 0.3-4M . |
If the clamping length of the lead cable is too large ,it is not suitable for the application with much drift . |
| CX-FLM-UQK-UQK-61-2 | Double point | Decided by clamping position of the float | |
| CX-FLM-UQK-UQK-61-3 | Three point | ||
| CX-FLM-UQK-UQK-61-4 | Four point |
Output signal:JAG-5H reed switch output, high temperature mercury switch contact .
Contact type :Normally open
Contact capacity :AC220V 1A，DC220V 1V
Contact working life:5×10000
Ambient temperature:-10～55℃
Last：CX-UQK float level sensor Next：CX-FLM-UQK-12 series float leve..
